Multi-pattern Condenser Microphone
AT2050-CR
$174.30
AT2050-CR
Overview
CERTIFIED REFURBISHED
Each Audio-Technica Certified Refurbished product has been meticulously inspected and tested by a member of our quality control team, cleaned* and fitted with replacement parts as needed, ensuring you get the same high-fidelity performance you expect from new A-T products. We include all the accessories and cables that accompany the new model, along with a one-year limited end-user warranty.
*Some refurbished products may have small blemishes, but nothing that will in any way affect the product’s performance.
+6
Features
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Switchable 80 Hz high-pass filter and 10 dB pad
- Large diaphragm for smooth, natural sound and low noise
- State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
- Includes shock mount & protective pouch
Specifications
| Microphones | |
|---|---|
| Element | Externally-polarized (DC bias) condenser |
| Polar Pattern | Cardioid, Omnidirectional, Figure-of-Eight |
| Frequency Response | 20 - 20,000 Hz |
| Low Frequency Roll Off | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity | -42 dB (7.9 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) |
| Noise | 17 dB SPL |
| Dynamic Range | 132 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 77 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 4.7 mA typical |
| Switches | Polar selection; Flat, roll-off; 10 dB pad (nominal) |
| Weight | 412 g (14.5 oz) |
| Dimensions | 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter |
| Output Connector | Integral 3-pin XLRM-type |
| Accessories Included | AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
| Audio-Technica Case Style | R5 |
Downloads
AT2050 Submittal Sheet
AT2050 Specification Sheet